ePMP 3000 Lite and RF Elements Carrier Class 2x2 sector

[werever]

Hello, at this moment I am using and RF elements Carrer Class sector 2x2 with an ePMP 1000 radio, for this I bough an Rf elements bracket (see picture attached)

My question is, is there in the market some kind of bracket similar to this one, for ePMP 3000 Lite ? Since I need to replace the radio

I just realize that pigtails are too short, and the radio must be attached to the antenna, It cant be mounted in a spare pole, like included bracket suggest.

Any ideas?

thanks in advance, folks

Edit: adding some pictures about ePMP 1000 and 3000 lite and his brackets

• IMG_20200528_201535.jpg (81.7 KB)

[Jacob_Turner]

If you drill a hole in the ez bracket that you have on the 1000 you can re-use it on the 3000L.

Something like the attached image.

• IMG_20200331_124559.jpg (5.27 MB)

[werever]

thank you Jacob, will try your idea, and will try to 3d print the new bracket I found thanks to a FB group about cambium

here you can download the 3d design

https://www.rfelab.com/topic/654-epmp3000-l-bracket-for-sector-carrier-class-antenna/

just in case some one want to try it

[DigitalMan2020]

---

@Jacob Turner wrote:

If you drill a hole in the ez bracket that you have on the 1000 you can re-use it on the 3000L.

Something like the attached image.

---

Can a person get ahold of just the ez-bracket?