We've got a few deployed in 20mhz wide. With low noise (-80 or better noise floor) and -50 signal you should get DS9 downlink MCS and we 95+95 on mu-mimo spread so the downlink alone is almost 200mbps which is more than double the epmp1000 was able to do on the same spectrum. I'm finding the force300-25 dishes have much better gain and sensitivity than the force200 dishes did for some reason as well, signals gain a few db at least with a direct swap.
One thing we noticed is when there is noise the CPE's tend to disconnect quite easily so be careful of noisy areas.
- epmp3000_Dual_test.jpg (44.9 KB)
