ePMP 4500 Wi-Fi Mode - Testing

[uberdome]

I started a topic previously. I have finally taken the time to test Wi-Fi mode, but cannot seem to get basic connections. I would like to follow up. This is the post suggesting what to do:

Post: ePMP 4500 Wi-Fi Mode? - #22 by Fedor

@Fedor

Hi!

Standard Wi-Fi mode is available for configuration via SNMP and CLI.

wirelessInterfaceProtocolMode  OBJECT-TYPE
		SYNTAX	   Integer32 (1..5)
		MAX-ACCESS read-write
		STATUS	   current
		DESCRIPTION
	   "Protocol Module Mode:
		   1 - TDD
		   2 - AP/SM WiFi
		   3 - PTP.LL
		   4 - TDD PTP
		   5 - WLR
	   Device Allocation: AP/SM"
   DEFVAL  { 1 }
		::= { wirelessInterface 51 }

We would appreciate if you could try and provide your feedback.
We are reviewing the option to open it on UI in the further FW versions.

Thank you.

In this test, I’m attempting to connect to a standard 5 GHz AX Wi-Fi router. I have set and saved the wirelessInterfaceProtocolMode via SSH to 2. I have chosen the SSID and PSK in “Preferred APs”, and have all scan lists active.

I am not seeing any indication of possible connection. I’d like to know what other basic settings are expected so I can test further.

@Fedor , can you provide any guidance here?

Thank you, Chris