EPMP 4600C (Frist time)

Hi All,

Is there any documentation on how to set up and use 4600C? This is our first cambium product and we got the ISP supplies bundle to start testing. We have mostly ubiquiti equipment but wanted to test out Cambiums 6ghz gear.

I was able to get 5.4.2 loaded and linked on the bench but am only able to access 20/40 Mhz channels.

Any help and direction would be greatly appreciated.

You’ll need an experimental 6GHz license and then show that to Cambium support in order to get the special firmware that unlocks them. You can file a ticket here https://support.cambiumnetworks.com/

You can use the Quick Start link on the radio to get them quickly setup with a basic config. For PtMP use WLR, for PtP use ePTP.


If you already have the license, open a support ticket at https://support.cambiumnetworks.com/ , share your license and get special firmware (firmware name ends with FCC), that will open 6GHz frequncies. Alternately, please send me email/message with the license and I will send you the firmware in email.
Thank you.


Thank you guys. I am following up with ISP Supplies and will open a support ticket.