ePMP Software Release 3.0 is now available

Cambium_DaveS · July 27, 2016, 11:52am

ePMP Software Release 3.0 which support all ePMP devices including ePMP 2000 is now available at: https://support.cambiumnetworks.com/files/epmp/

Eric_Ozrelic · July 27, 2016, 5:23pm

Could you please update cnMaestro to make this release available? Thanks!

newkirk · July 29, 2016, 4:11pm

Anybody else running into SNMP failures?

root@newmon:/usr/local/canmon/bin# snmpwalk -v2c -cescrw 10.10.5.3 cambium
CAMBIUM-PMP80211-MIB::cambiumCurrentSWInfo.0 3.0
CAMBIUM-PMP80211-MIB::cambiumHWInfo.0 1
CAMBIUM-PMP80211-MIB::cambiumDateTime.0 07/29/2016:11:41:52
CAMBIUM-PMP80211-MIB::cambiumSystemUptime.0 0000:22:03:28
CAMBIUM-PMP80211-MIB::cambiumWirelessMACAddress.0 00:04:56:C6:63:7E
CAMBIUM-PMP80211-MIB::cambiumDFSStatus.0 1
CAMBIUM-PMP80211-MIB::cambiumEffectiveCountryCode.0 US 
CAMBIUM-PMP80211-MIB::cambiumEffectiveAntennaGain.0 15
CAMBIUM-PMP80211-MIB::cambiumEffectiveSSID.0 ESCBH-FAE
CAMBIUM-PMP80211-MIB::cambiumEffectiveAuthenticationType.0 2
CAMBIUM-PMP80211-MIB::cambiumEffectiveDeviceName.0 FAE-ESCBH
CAMBIUM-PMP80211-MIB::cambiumUbootVersion.0 U-Boot 9344_PX 1.1.4.e (Jul 25 2016 - 17:49:34)
CAMBIUM-PMP80211-MIB::cambiumLANMACAddress.0 00:04:56:C6:63:7D
CAMBIUM-PMP80211-MIB::cambiumCurrentuImageIVersion.0 Not applicable 
CAMBIUM-PMP80211-MIB::cambiumCurrentuImageVersion.0 3.0
CAMBIUM-PMP80211-MIB::sysRebootCounter.0 19
CAMBIUM-PMP80211-MIB::cambiumDriverType.0 2
CAMBIUM-PMP80211-MIB::cambiumESN.0 000456C6637D
CAMBIUM-PMP80211-MIB::cambiumEPMPMSN.0 N/A
CAMBIUM-PMP80211-MIB::cambiumFactoryReset.0 1
CAMBIUM-PMP80211-MIB::cambiumSubModeType.0 4
CAMBIUM-PMP80211-MIB::cambiumDAVersion.0 2.40
CAMBIUM-PMP80211-MIB::ePMP2000PowerSupplyStatus.0 0
CAMBIUM-PMP80211-MIB::ePMP2000SmartAntennaStatus.0 0
Error in packet.
Reason: (genError) A general failure occured

every time I use snmpwalk it fails at that spot.

j

Maggiore81 · August 1, 2016, 11:38am

Using CNS I am not able to upgrady any 2.6.x to 3.0

always ERROR OCCURRED.

it doesnt specify me wich error..

I have to upgrade eveything on hand.

Fedor · August 1, 2016, 1:47pm

Hi Maggiore,

We have not faced with described issue in our Lab.

I would be really appreciate if you could you please let us know device's hardware types.

Also please verify you have proper CNS server settings.

Is it possible to downgrade your devices to previous Firmware versions via your CNS Server?

Thank you.

Maggiore81 · August 1, 2016, 3:46pm

We have a CNS on a Windows 2012 server.

We have Force 200 and EPMP Force 110 as CPE.

we upgraded flawlessy from 2.4.x to 2.6.x

from 2.6.x to 3.x we got an error but without any details.

Swing · August 2, 2016, 2:48am

I upgraded a pair of Force 200s in ePTP mode to 3.0 and now am unable to make any changes to the radio configuration because I get a validation error.

"Transmitter Output Power"+"Antenna Gain" values must not exceed 36

This live link was previously allowed to run at 29 dBm. I'm stuck - please help. Is there any option to run at 29 other than to downgrade the firmware?

Thanks.

Cambium_Sri · August 2, 2016, 3:51am

@Swing wrote:

I upgraded a pair of Force 200s in ePTP mode to 3.0 and now am unable to make any changes to the radio configuration because I get a validation error.

"Transmitter Output Power"+"Antenna Gain" values must not exceed 36

This live link was previously allowed to run at 29 dBm. I'm stuck - please help. Is there any option to run at 29 other than to downgrade the firmware?

Thanks.

Hi,

This is a GUi only defect. You can set the power back up to 29 dBm using SNMP or CLI commands. We will fix this defect in the very next release.

Thanks,

Sriram

Swing · August 2, 2016, 3:54am

Siram,

Thank you for the very quick and late night response..

Steve

Fedor · August 2, 2016, 9:20am

_________________________________________________

Maggiore81 wrote:

We have a CNS on a Windows 2012 server.

We have Force 200 and EPMP Force 110 as CPE.

we upgraded flawlessy from 2.4.x to 2.6.x

from 2.6.x to 3.x we got an error but without any details.

________________________________________________

I cannot reproduce issue in our Lab with Force 200 too.

Is it acceptable for you to provide remote access to your CNS and one of devices experienced that issue?

Thank you.

Fedor · August 2, 2016, 9:56am

___________________________________________

newkirk wrote:

Anybody else running into SNMP failures?

root@newmon:/usr/local/canmon/bin# snmpwalk -v2c -cescrw 10.10.5.3 cambium
CAMBIUM-PMP80211-MIB::cambiumCurrentSWInfo.0 3.0
CAMBIUM-PMP80211-MIB::cambiumHWInfo.0 1
CAMBIUM-PMP80211-MIB::cambiumDateTime.0 07/29/2016:11:41:52
CAMBIUM-PMP80211-MIB::cambiumSystemUptime.0 0000:22:03:28
CAMBIUM-PMP80211-MIB::cambiumWirelessMACAddress.0 00:04:56:C6:63:7E
CAMBIUM-PMP80211-MIB::cambiumDFSStatus.0 1
CAMBIUM-PMP80211-MIB::cambiumEffectiveCountryCode.0 US 
CAMBIUM-PMP80211-MIB::cambiumEffectiveAntennaGain.0 15
CAMBIUM-PMP80211-MIB::cambiumEffectiveSSID.0 ESCBH-FAE
CAMBIUM-PMP80211-MIB::cambiumEffectiveAuthenticationType.0 2
CAMBIUM-PMP80211-MIB::cambiumEffectiveDeviceName.0 FAE-ESCBH
CAMBIUM-PMP80211-MIB::cambiumUbootVersion.0 U-Boot 9344_PX 1.1.4.e (Jul 25 2016 - 17:49:34)
CAMBIUM-PMP80211-MIB::cambiumLANMACAddress.0 00:04:56:C6:63:7D
CAMBIUM-PMP80211-MIB::cambiumCurrentuImageIVersion.0 Not applicable 
CAMBIUM-PMP80211-MIB::cambiumCurrentuImageVersion.0 3.0
CAMBIUM-PMP80211-MIB::sysRebootCounter.0 19
CAMBIUM-PMP80211-MIB::cambiumDriverType.0 2
CAMBIUM-PMP80211-MIB::cambiumESN.0 000456C6637D
CAMBIUM-PMP80211-MIB::cambiumEPMPMSN.0 N/A
CAMBIUM-PMP80211-MIB::cambiumFactoryReset.0 1
CAMBIUM-PMP80211-MIB::cambiumSubModeType.0 4
CAMBIUM-PMP80211-MIB::cambiumDAVersion.0 2.40
CAMBIUM-PMP80211-MIB::ePMP2000PowerSupplyStatus.0 0
CAMBIUM-PMP80211-MIB::ePMP2000SmartAntennaStatus.0 0
Error in packet.
Reason: (genError) A general failure occured

every time I use snmpwalk it fails at that spot.

___________________________________________

Hi newkirk,

Thank you for your feedback regarding SNMP issue.

Defect confirmed and will be fixed in next release.

Thank you.

giuseppe4 · August 3, 2016, 4:01am

Hello,

there is a bug in ePMP 3.0 with ePMP 2000.

1) Set your AP to Spectrum Analyzer

2) Reboot

3) Use spectrum analyzer

4) Change mode back to "Access point"

It says:

Configuration save failed.

Configuration->Radio->Transmitter Output Power:
Add record with proper values

Quick Start->Frequency Carrier:
Add record with proper values

But you can’t set these values as you’re in Spectrum Analyzer mode!

I had to reset my AP to get access to it.

Fedor · August 3, 2016, 8:45am

Hi,

Thank you for reporting that.

Issue is relevant only on ETSI locked ePMP2000.

We apologize for any inconvenience.

Issue will be fixed in next release.

Thank you.

Etor · August 5, 2016, 8:54am

Hi,

I have this problem when save the configuration

08:26:51 Configuration save failed.

Configuration->Network->Gateway:
IP and gateway are in different subnets

Quick Start->Wireless Gateway:
IP and gateway are in different subnets

Only failed in the new version 3.0 in all Epmp´s Sm

any solution?

Thanks

Fedor · August 5, 2016, 8:58am

Hi Etor,

What Network mode(NAT/Bridge), IP address and Default Gateway are configured on SMs?

Thank you.

Etor · August 5, 2016, 9:03am

I Fedor

In Nat moden and Pppoe configuration

Thanks

Fedor · August 5, 2016, 9:30am

I would be really appreciate it if you could attache screenshot of configuration you are trying to save.

Thank you.

Etor · August 5, 2016, 9:59am

I only agregated cnMaestro in the configuration

Thanks

Fedor · August 5, 2016, 10:02am

Thank you.

Please attach also Configuration -> Network page.

Kevin_Simms · April 26, 2018, 4:02pm

Just putting this here in case anyone else was looking for a resolution to this issue. Log into the SM and change the IP assignment to Static, fill in whatever good management ip, sub, gateway that you can use, and save. Once thats done you can revert back to DHCP or NAT and you will no longer get the wrong gateway error when uploading configs.