Supported Platforms ePMP AX Platforms ePMP AC Platforms ePMP N Platforms Download the firmware and documentation from: Force300-13L, Force300-25L Force300 ePMP 3000, ePMP 3000L ePMP 4xxx, Force4xxx ePMP 1000/2000 ePMP 1000 Force 100/110/180/190/200 SM ePMP Elevate Force 130 ePMP WOM Features de…

I have just upgraded a 4500 sector to version 5.12. Before the upgrade, most SMs were able to operate at MCS 11 in the downlink, but now none of them go beyond MCS 9. All SMs are currently running version 5.11.1. I also upgraded one SM to version 5.12, but it still does not go beyond MCS 9. No con…

Hello @pdinoto , Could you please PM me the tech support files from both the AP and the SM while the SM is running version 5.12.0? Please ensure the files contain some traffic statistics. If there is no active traffic after the upgrade, kindly run a wireless link test before generating the files. T…

I upgraded our system, 4600s, 4625s and 4616s, to 5.12.0 last night. I have fiber feeding to the 4600s on one site, with 40 SMs on one 4600 (we’ll call that AP NWT2). I’m running 80 Mhz wide channel. I’ve tried setting NWT2 at both 50/50 scheduling and Flexible. I’m using one particular SM as te…

Sounds like your uplink rates to the AP are lower than the downlink rates, which would make sense, unless your subscribers are quite close due to the limited EIRP involved and AP antenna gain. I’m making assumptions of course, but if you post the monitor → wireless page from the ap that would proba…

The upload bandwidth rates are definitely much lower than download, even with 50/50 scheduling. At the point in time that I got this screen capture, it DS9/DS9 with which I’m testing. However, I noticed that the upload DS number is varying quite a bit, on most (if not all) of the SMs, even on SMs …

Yeah, all your UL links are worse than your DL - and 9 of them are SS modulations… which is a problem. :folded_hands:

And they change rather quickly as I watch them. They aren’t stable at all. But, even for those that are DS and good, the upload is still just a fraction of what the download is.

That’s almost certainly noise at your tower end. Have you got other APs nearby on the same frequency?

No nearby APs on the same frequency.

Cambium Community

ePMP Software Release 5.12.0 is now available

Products ePMP

release-notes

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled