MCuddy1
(MCuddy1)
October 27, 2016, 9:49pm
1
Hi,
This our first epmp2000 and we have an issue with all frequencies below 5730 are not available for selection in the drop down menu. The radio is attached to beam forming and standard 120deg antenna. Country is NZ..
Could anyone shed some light?
Thx
Denys_D
(Denys D)
October 28, 2016, 8:17am
2
Hi Thx,
According to FCC regulatory, frequencies below 5735 are not allowed for your region.
richinuk
(richinuk)
October 28, 2016, 9:43am
3
... interesting - I've not checked out the v3 software yet but a bit poor if this has been messed up. @Denys - not sure what the FCC has to do with NZ. Here's the regulation: https://gazette.govt.nz/notice/id/2016-go5551 and https://gazette.govt.nz/notice/id/2015-go2276 .
Rich
Denys_D
(Denys D)
October 28, 2016, 5:30pm
4
It was found that as of today, 5.2 GHz and 5.4 GHz frequency bands should be available. This will be fixed as soon as possible.
Denys_D
(Denys D)
October 31, 2016, 2:42pm
5
This will be fixed in 3.2 release.