Factory Reset 450i SM

Products PMP
2
@pgator17 wrote:

How do i factory reset a 450i 900 radio. I can not access the web interface on the device. I tried the ip address and it doesnt respond on that address I tried the default address of 169.254.1.1  the radio is on a clients house and I am hoping I dont have to go up on the roof to get it. 

Hi, 

For the 900 MHz 450i SM, you will first need a default(override) plug. See here on how to make one. Then (from the User Guide):

  1. Insert the override plug into the RJ-11 utility port of the module. 
  2. Power cycle by removing, then re-inserting, the Ethernet cable. RESULT: The module boots with the default IP address of 169.254.1.1, password fields blank, and all other configuration values as previously set. 
  3. Wait approximately 30 seconds for the boot to complete. 
  4. Remove the override plug. 
  5. Set passwords and IP address as desired. 
  6. Change configuration values if desired. 
  7. Click the Save Changes button. 
  8. Click the Reboot button. 

Thanks,

Sriram

1 Like