Hi Forum.
I appreciate from you to analyze the following statistics so you can make me some recommendation this is an AP to 2 SM Link in a cluster the point is that every 1 or to hours the link fail and retablished by itself. I have reviewed all the cofigurations but found nothing. Thanks
Session Count: 114, Reg Count 114, Re-Reg Count 24
RSSI (Avg/Last): 1072/1078 Jitter (Avg/Last): 1/1 Power Level (Avg/Last): -53/-53
Sustained Uplink Data Rate (SM): 3500 (kbit)
Uplink Burst Allocation (SM): 500000 (kbit)
Sustained Downlink Data Rate (SM): 3500 (kbit)
Downlink Burst Allocation (SM): 500000 (kbit)
Low Priority Uplink CIR (SM): 0 (kbps) Low Priority Downlink CIR (SM): 0 (kbps)
Probably interference. Do a search on this forum on interference.
also, the following threads may be helpful
http://motorola.canopywireless.com/supp … php?t=3280
http://motorola.canopywireless.com/supp … php?t=2827
This could be interference but you do have a low avg Jitter and stable dBm as well as fairly low re-reg count.
I would like to see what your uptime is on your SM once the equipment comes back online. If the time low then the module its self is rebooting which would indicate a bad cable or power supply or unstable power.
Jerry,
Excellent! Thank you.
Now everything is OK.
What was the cure?
As you said Jerry.
Interference on my own site, just reorganized all the frecuencies and everything all right, no more packet loss and no more fail.
Thanks you. :lol: