Force re-scan

Mirko · August 7, 2015, 3:39pm

How to force a rescan of the SM module?

Is possibile without rebooting everytime?

Chris_Bay · August 7, 2015, 4:36pm

you can disconnect the CPEs from the AP, go to monitor, then wireless. hit the disconnect button and you'll drop the CPE and force a re-scan.

Mirko · August 7, 2015, 4:42pm

ok, and what is the command from CLI to disconnectStation?

I need to implement on my custom webApplication

Thanks

Chris_Bay · August 7, 2015, 8:15pm

I'm not sure, i haven't tried to do that. here is the CLI references for the EPMP.

http://community.cambiumnetworks.com/t5/ePMP-Configuration-Management/ePMP-Command-Line-Interface-CLI/m-p/38699#U38699

Mirko · August 7, 2015, 8:45pm

There is no command to deregister.

Possible?

Cambium_Sri · August 7, 2015, 9:00pm

Mirko,

To force a rescan try using cambiumForceSTARescan (OID: .1.3.6.1.4.1.17713.21.4.39). That's the SNMP name and OID. I'm checking with the team now if this is supported in CLI.

Thanks,

Sriram

Mirko · August 8, 2015, 9:08am

Thanks Sriram

Next week I try with SNMP

Mirko · August 10, 2015, 5:58pm

Scan via SNMP works but after a ForceRescan one AP get bad Wireless Key (is the same on both APs)

I try a reboot and the result is