How do I configure VLANs on cnMatrix Switches via CLI

[swren-cambium]

Hi Timothy

You can use Hybrid as this allows you to define what VLANs you wish to be tagged - but will need to define an untagged VLAN as well.

cnMatrix Switchport modes explained

Summary: This article describes the cnMatrix switchport modes and gives examples of how and when to use them. Each port on a cnMatrix switch can be configured as access, trunk, or hybrid port. Here's a description of these port types: Access Mode A port that can be assigned to a single VLAN. It accepts and transmits only untagged frames. Access port is typically connected to desktop PC or devices incapable of handling tagged frames. Trunk Mode A port that is auto associated to ALL VLANs. It a…

Thanks
Stuart