IPv6 DHCP-PD on ePMP

koribostico · October 22, 2022, 4:01pm

Dear, I would like to ask if there are developments to implement IPv6 with DHCP-PD support in ePMP client equipment. And if so, when could a firmware come out with it?

koribostico · May 22, 2023, 3:30pm

some notice from this theme

aka · May 23, 2023, 11:43am

Hello @koribostico,
solid IPv6 support along with prefix delegation will be in 5.6.0 release. Unfortunately I can not provide any good estimate as for now. Work is in progress.

koribostico · August 20, 2023, 11:05pm

Hello Andrii
some notice from this theme

regards

Jorge_Arriaga · July 4, 2024, 11:11pm

Hi is there aby udate I only see IPV6 PD on epmp 3000 but no in epmp 1000 with 4.8

aka · July 5, 2024, 9:41am

Hello @Jorge_Arriaga,

it is in our road map!
But the product is old and has less priority then AX platform, which is rocking now.
Unfortunately, I can not give and good estimate this day. I will update this topic regarding IPv6 for N-series radios as soon as I get some RC to test.
Thank you!

koribostico · October 3, 2024, 1:41pm

Hi Andrii, I’m testing IPv6 prefix delegation assignment on 3000 series clients in version 4.8.1. I see that the client correctly takes the prefix up to a length of /60. What I see is not happening is a double delegation nor are there ways to route any block further down. My topology is as follows

PPPoE Server Router → AP Cambium (Bridge) → ST Cambium (Router - PPPoE Client) → Client Router (DHCP Client V4 and V6) → client terminals

I was also testing 130 and 190 devices with the same version, but they would not be supporting address assignment via PPPoE.

On the other hand, I see that there is already a beta 5.9.0 that is being tested for all devices. Would this version have full IPv6 support on all devices?

aka · October 3, 2024, 1:57pm

Hi, @koribostico,

IPv6 implementation is still the same across platforms. Scope of 5.9.0 is scalability improvements for AX and bug-fixing.

Could you elaborate more with configuration screenshot and what exactly does not reach what on:

koribostico · October 21, 2024, 1:57pm

Hola Andri, perdón que escriba en español.
En mi caso, mis clientes marcan la session PPPoE en el SM. El equipo toma la IPv6 y su correspondiente Prefijo delegado. Abajo de el hay un router que toma una dirección IPv6 y espera recibir un prefijo delegado. Pero este prefijo no es entregado por el SM. Probe tanto en DHCP server stateless como statefull. Envio captura de pantallas.