LINKPlanner online has been updated to version 6.3.3
The key features of the 6.3.3 release are:
General
Bulk editing capabilities in Site, PTP Links, and PMP table views
Now parameters can be edited in table views similar to desktop applications.
To customize the table view, click 
dialog box, which is located at top right corner of the table.
To move items between the two sides, use the highlighted buttons in the center.
To move some selected items, highlight the ones required and then use the top two buttons (> to add items to the table or < to remove from items from the table).
To move all items from one side to the other select >> or <<.
To change the column order reorder the items on the right hand side. To reorder the items select the items to be moved and use the up and down arrow buttons at the side of the window. The items will appear in the table in the same order as in the list.
There is a filter option on both sides of the table, which work the same as other filters in LINKPlanner. When you use the filter the reduced list is indicated. Within the filtered list you can continue to select and move using the single move buttons, however using the move all buttons (double arrow) will only move across what has been filtered.
Some of the columns support editing, where the values can be changed in the table view. To change the value in the table view, move the cursor over the cell and click 
. Select from a pre-defined list (for example when changing the band), for numeric values either use the up and down arrow keys or type a new value into the cell.
Values that are editable can also be changed for multiple rows simultaneously by first selecting the required rows and then selecting a cell that needs to be changed. If the new value is not valid for the other item settings (e.g., choosing a PTP 670 product while the band is set to 38 GHz), the product value will not update.
To quickly select multiple rows in a table, use CTRL + click to select individual rows and SHIFT + click for continuous selection in the Windows operating system.
Applying a change to a large table may take some time to complete, particularly if it requires displayed results to be recalculated.
Certain columns may still be missing or read-only. Please contact linkplanner@cambiumnetworks.com to request any changes.
Added “Show in Map” and “Revert Changes” option to the Sites, Links, and Network Devices details panel
To locate the Sites, Links or Network Devices in the map view from the respective details page, click 
icon, which is displayed next to the 
icon at the top.
To revert the changes made, click the 
icon in the PTP links details page, which is displayed next to the Apply button. This icon is only displayed when there are changes to the parameters, replacing the icon.
Updated geomagnetic declination in line with changes from NOAA
Updated to latest WMM2025
Added “Mesh Links Per Sector” to the Terragraph Planner
Users can now specify mesh links per sector, and the Terragraph Planner enforces those selected limits.
PTP 670/700
Support PTP670/700 HCMP products in PMP mode
PTP 670 HCMP and PTP 700 HCMP products are now available in PMP mode. To use PTP 670/PTP 45700 HCMP radios, select 4.7 to 5.8 GHz frequency bands. For PTP 78700 HCMP radios, choose the 7 and 8 GHz frequency bands.
In this release only Standard TDD Frame Mode is supported.
ePMP
Support ePMP Force 4518 in both PTP and PMP mode
The ePMP Force 4518 is available in both PTP and PMP modes. In PTP mode, this product is compatible with 5 GHz ePMP 11ax products. In PMP mode, this product available as a Subscriber Module for the ePMP 4500 series Access Point. In this release, the ePMP Force 4518 product is only available for ROW regions.
Rwanda regulatory settings
Added Rwanda regulatory in the 5.1 GHz, 5.2 GHz, 5.4 GHz and 5.8 GHz bands for ePMP 11ac and 11ax products.
Retired Range Extender
Retired ePMP Force 425 range extender.
PMP 450
Regulatory changes
- Added United Kingdom regulatory in 3.9 GHz band for PMP 450m.
- Updated the PMP 450b6 FCC/IC regulatory limits in the 5.8 GHz band.
PTP 820/850
80 GHz PTP 850EX-P
To use PTP 850EX-P product, select the 80 GHz frequency band. Currently, the product only supports 1+0 Link Type.
2+0 XPIC Link Type for the PTP 850EX.
New part number for PTP 850EX includes activation keys
Replaced the standalone radio part with the radio with activation keys part in the PTP 850EX BOM.
Cambium Networks introduced a radio bundled with software keys. The default BOM replaces the standard radio only part with the radio bundled with software keys
Regulatory support for Canada with PTP 820A in 8GHz and 15GHz bands
Added Canada regulatory in the 8 GHz and 15 GHz bands for PTP 820A with RFU-D/RFU-D HP products.
Updated PTP 820/850 products to Release 12.9
New MRMC Script 4575 is added for PTP 820A with RFU-D HP product. This MRMC script is applies to ETSI 112 MHz bandwidth and ACCP configurations.
Bug Fixes
- Corrected the PMP 450v AP and SM regulatory limits in the FCC/IC 5.1 GHz band.
- Ensured that the appropriate TwistPort adapter is included in the BOM for ePMP products when RF Elements TP antennas are selected.
- Fixed the issue preventing the remote end height from being set on 2+0 PTP links.
- Fixed the N000000L179 PSU quantity in the PTP 850EX BOM.
- Ensured that the correct Canada radio part is added to the ePMP 4600 series products.
- Ensured that the LINKPlanner project export and project report include the Project Settings details.
- Fixed the issue where the site did not include a default name when importing a KML file without a site name.
- Fixed the issue where multiple clicks on the ‘Create Sites’ button while importing caused duplicate sites to be created.
- Added a message to the Convert or Duplicate Site field to notify the user when site limits are exceeded.