Hi Jim, I’ve two issues with all the indoor Cambium AP designs post mounting to a false ceiling, one is that it does not give a very neat flush look like the Unifi APs do, and another is the ethernet port is located at the longer side of the cutout which gives a very short space for the cable to be bent into the ceiling, it also makes the cable bend radius to be exceeded to the given standards. I’ve some pics to explain, maybe not very good qualities.
First on the looks, here is how Unifi & Cambium looks:
The Unifi, gives complete flushed to the ceiling look, no cables visible on any sides.
(Architects & End-customers love the after install look)
The cable is visible due to the design:
Second, the present position of ethernet port gives small space shown in blue line for the cable to come out of the port and bend. If the port is positioned on the shorter side of the cutout, it gives much bigger space shown in red.
Had pictures of E410 only, one site is pending for XV2/2 but the bracket is similar in design. Have ordered XV2/21 for newer projects and yet to experience the new bracket. But with the official unbox videos, it seems the overall thickness of the bracket has increased only.