I am replacing a router at a site with a NSE 3000. The customer has a Layer 3 switch doing routing and DHCP. I just need the NSE to act as the router with the same setup.
The IP range is 192.168.55.0/23. The Router I have put on 192.168.56.254/28 (VLAN 1, name “LAN”)
The Layer3 switch is on 192.168.56.241/28
Is it right that I only need to add the static route of:
Destination = 192.168.55.0
PrefixLength = 23
Next hop = 192.168.56.241
Exit Interface = VLAN 1
My NSE is connected to a Starlink as is online, so the WAN side is working just need to ensure the LAN side is set for a simple swap out next week on site