Only one GPS syn jack on the CMM Micro?

Products PMP
1

This might be an easy question, but why only one sync jack on the CMM Micro? And… who gets this jack? The BH? The AP? I would assume the BH, and the AP syncs off the ethernet port?

Thanks!

2

This port is not used. The timing pulse is sent out the 8 switch jacks to whatever canopy module you want to plug in. This port also allows for power over ethernet on all canopy systems except the 45mb backhauls. On your AP’s or BH’s you will want to receive your timing pulse from the power port, not the timing port. Hope this helps.

3

yeah, I saw that in the manual after I posted this question… thanks for the feedback!!