PMP450x System Release 24.0.1 is now available at https://support.cambiumnetworks.com/files/pmp450 and it is available on cnMaestro within 24 hours.
Release 24.0.1 is a maintenance release of Release 24.0 with primarily bug fixes.
Additional enhancements in Release 24.0.1
| Products Affected | Tracking | Description |
|---|---|---|
| All SMs | CPY-19000 | The SM minimum bridge table size changes from 4 to 64 in Release 24.0. The bridge table size range changes from 64 – 4096 in Release 24.0 to 1 – 4096 in Release 24.0.1. |
Problems and limitations corrected in Release 24.0.1
| Products Affected | Tracking | Description |
|---|---|---|
| 450v | CPY-19054 | Engineering.cgi did not load sometimes due to non-printable characters. |
| 450m and 450i AP | CPY-19037 | In Release 24.0 software, the Session Status → LQI reported inaccurately low values. Uplink modulations from SMs were intermittently reporting a switch between 1X and the correct operating value. These issues were identified but did not affect performance. |
| 450v | CPY-19023 | Reset occurred due to FatalError - NiFreeBuf() bfr already freed. |
| 450v AP | CPY-19016 | AP had SM Receive Target Level defaulted to -49 instead of the normal -52. |
| 450, 450i and 450m APs | CPY-19011 | Session drops were observed on operator sites running Release 24.0 on SMs, especially legacy 450 SMs. |
| 450v SM | CPY-19008 | SM dropped sessions due to power adjust failure. |
| All SMs | CPY-19006 | cnMaestro did not display UL modulation rate of SMs running 24.0 firmware. |
| 450i AP | CPY-18528 | AP went into rolling reboot with Restarted by CaOs after loading user SSL certificate. |
| 450i AP | CPYV-792 | SMs registered to PMP 450i AP running 24.0 firmware dropped sessions. |