PTP 550 load balancing with single source/destination

[JVC1 (Jose)]

PTP 550 Load Balancing and Throughput Testing

[550.jpg] PTP 550 provides up to 1.4 Gbps throughput with ARQ and asymmetric non-contiguous channel aggregation across the 5 GHz band. PTP 550 utilizes two integrated radio interfaces which are “bonded” together to achieve 1.4 Gbps throughput (with two 80 MHz channels). This article explains the load balancing mechanism and provides two examples of how to fully test and exercise the link. [lb.jpg] Load Balancing With Channel Bonding enabled, the PTP 550 applies a load balancing algorithm t…

What a job!
I understand that each flow that meets the three conditions (TCP / UDP + src IP addr + dst IP addr) will go through the same link, is that correct?
Then I have one question: If all the traffic passing through the two-links-configured PTP 550 has the same source IP address and the same destination IP address (e.g. one UDP video transmission), will the load balancing algorithm cause all traffic to go through the same link (A or B)? If yes, consequently the other link will be empty.
Regards,
Jose