PTP 670 Second Data Service

Products PTP
5

Thanks for the feedback!  The user guide goes into more detail about the various management and payload data options for network traffic.  I believe the reason that SFP was not a selectable choice was due to a licensing issue.  In order to enable the SFP port, a license is needed.  This license includes: the actual SFP module, license for use, extended gland, and instructions.  I've included the part numbers for the various kits below.

C000065L008A  Single Mode Optical 1000BaseLX SFP Interface per ODU 
C000065L009A  Multi-mode Optical 1000BaseSX SFP Interface per ODU 
C000065L010A  Gigabit Ethernet 1000BaseT SFP Interface per ODU 

Also, in case you start searching for more PTP670 info, almost all of the references to PTP650 can be applied to the PTP670 since they are near identical.  Here are a couple of good ones, in addition to our webinar archive and YouTube channel.

http://community.cambiumnetworks.com/t5/PTP-Getting-Started/Quick-Start-Setup-for-PTP-650-Demonstrations-and-Evaluations/m-p/50833#M20

http://community.cambiumnetworks.com/t5/PTP-Getting-Started/What-does-Vector-Error-VE-mean-and-what-are-the-practical/m-p/37425#M11

When it comes to TDM services, there are some additional caveats.  Be sure to check the release notes, as specific firmware versions are needed.  This also applies to PTP650 compatibility.