PTP820 Rel 8.5.5 is available on web

To all,

PTP820 software Release 8.5.5 and all related documents are available at: https://support.cambiumnetworks.com/files/ptp820/

Here is highlight for new feature/functions in Release 8.5.5:

  • PTP820S/C:
  1. Support Minimum Modulation setting on ACM
    • Customer is able to define both maximum and minimum modulation mode of ACM
  2. Support Radio External protection in Line Protection mode
    • Customer is able to run 1+1 HSB configuration of PTP820S and PTP820C using CAT5 cable in addition to the 1+1 HSB Fiber configurations already supported in existing release.
  3. Support IEEE 1588v2 Transparent Clock
  4. 1731 Connectivity Fault Management (CFM)
  5. Timeout for Trap Generation
  6. Support 5 MHz channels
  7. Link ID mismatch – Adds a mode to enabled blocking of traffic in the event of link ID mismatch
  • PTP820G
  1. Support Minimum Modulation setting on ACM
    • Customer is able to define both maximum and minimum modulation mode of ACM
  2. Support External Alarm output
  3. 1731 Connectivity Fault Management (CFM)
  4. Support 5 MHz channels
  5. Link ID mismatch – Adds a mode to enabled blocking of traffic in the event of link ID mismatch

 Regards

Allen

1 Like

in addition, for PTP820C/S radio external protection configuration, only Cisco Switch is recommended for such configuration.

Regards

Allen

1 Like