PTP820 Utilization Statistics

On a PTP820s running

If I check Radio > PM & Statistics > Traffic > Utilization, would the percentage be calculated based on the current modulation amount? For Example, if the modulation is at 442Mbps at the time the calculation is performed, and usage is 221Mbps, then utilization would be 50%, and if a minute later the modulation has dropped to 70Mbps and usage is 70Mbps, the utilization at that instant would be 100%.  So for that 15 minute time period, the peak would be 100%, and average would be total bytes transmitted divided by total bytes that could have been transmitted, based on time it was operating in each modulation mode.

Am I on the right track?



I have forwarded this to our support and development teams.

Thank you.