Hey everyone, We currently have a bunch of customers that we have installed PMP or ePMP and that use cnPilots for their WiFi but we never used the remote management parts of the Maestro to manage them. What are the recommended steps for a customer using a residential router (r190, r200, etc)? It s…

Hi , Please check below link . If you still have issue let me know . [image] User Defined overrides for settings 2.5g and 5g to same password and how to set channel to 40 mhz? cnMaestro SSID1=${SSID1=2.4G_Name} WPAPSK1=${SSID1_PASS=2.4G_password} RTDEV_SSID2=${SSID2=5G_…

Stefan, Welcome to the Cambium community. My recommendation is to create a single AP Group for all residential routers configured the same. If all your residential routers have the same configuration, then you only need one AP Group. If there is a configuration parameter that must be different f…

This is what I thought as well. But, what do you do if you have a customer that wants a specific name or password? I know on the enterprise wifi like the e600 there are options to change the wifi name and password, but my override options on my test router (r190 and r200) only show admin password, c…

Ohh okay, I see now. You have to add those lines to the “User-defined Overrides” Section in order for those boxes to appear. I didn’t know that before, thank you Nilesh!

We just got rid of AP groups altogether finally. Too much PITA Using templates you can achieve the ESSID/key management in a very clean fashion

Question about customers using cnPilot r190, r200 on the Maestro

Products Residential Wi-Fi

Nilesh22 (Nilesh22) October 19, 2021, 5:24am 4

Hi ,
Please check below link . If you still have issue let me know .

Regards,
Nilesh