R201P WAN CONNECTION TO GUI

Products Residential Wi-Fi
1

I have install a R201p as a router, it wroks fine.

Now I am trying to opoen a port in order to have access to R201P fron WAN

my router r201p have the following configuration

mwan_num=1
mwan_id=1
mwan_vid=1
mwan_1p=1
mwan_tag_mode=0
mwan_is_bridge=Route
mwan_nat_en=1
mwanConnectionMode=STATIC
mwan_ipaddr=192.168.1.205
mwan_netmask=255.255.255.0
mwan_gateway=192.168.1.1
mwan_primary_dns=8.8.8.8
mwan_secondary_dns=8.8.4.4

my qusestion is how from the wan network (192.168.1.0) I will be connected to the GUI of R201p

2

Hi,

I can see that you are using static WAN configuration on the device.

You should be able to access this devices from the WAN port using this IP address, however; it depends on the set-up that you are using.

The only other configuration on the device is to enable the Remote Web Login under the Administrator settings.

If you are facing any issues while accessing the device using the WAN port, please share details on your network topology to support@cambiumnetworks.com so we can check what might be casuing the issue.

Regards,

Hardik Patel