R201P - Web Access Protocol Selection

Products Residential Wi-Fi
1

With the latest Firmware Version installed - 4.8.1-R4(202301111440) - how can one disable HTTP access on the Web Access Protocol Interface selection box, to allow the router to be accessed by HTTPS?

With the latest firmware , there are only two options to select as Web Access Protocol: HTTP and HTTPS.

With earlier firmware, you used to be able to select HTTP, HTTPS or both, as I recall.

2

@Danny_Ray_Boyer

Use this in the AP-Group’s User-Defined overrides. This will allow only HTTPS or only HTTP access to the device.

way_access_web=https

or

way_access_web=http