Recently I noticed I have a couple radios that show Radio Frequency “Not set” (Radio is off) highlighted in red on cnMaestro under Radio Details. One is an F300-25 Access Point set in TDD PTP mode, Software version 4.6.2. Everything seems to be working with the link.
The other one is an ePMP3000 Access Point set in TDD mode, Software version 4.6.2, cnMaestro says Radio Frequency “Not set” (Radio is off) highlighted in red , but also says the Channel Width is 10 MHz, when it is really 20 MHz. Everything seem to be working with this radio also.
I am assuming it’s a bug in the cnMaestro Cloud Version 3.2.0-r14