In reply to cnMaestro notifications - again - #3 by tophfro [image] cnMaestro notifications - again @Sakid_Ahmed sold me on this new router at WISPAmerica 2021 before it was even publically named the RV22. It came out of the gate strong but seems to be dying before it gets to the first turn of t…

Hi everyone. First of all, as it was mention earlier, there has been some updates on the internal PLM tam at Cambium and I am now in charge of the Wi-Fi product line including the RV22. In this interim time we’ve been scoping out the requested functionalities for the RV22 and we’ve put a plan in p…

As per the DNS misbehavior, our support team had worked in reproducing this and was unable to do so. The only option to get the IP via DHCP and at the same time the DNS manually assigned is via the device’s UI as the cnMaestro configuration allows to set them all dynamically or statically. The def…

The DNS issue can be replicated pretty easy. Have it get DNS via DHCP via one network, onboard it, then move it to a different DHCP network, the DNS is static from the original network. It seems the onboarding process for AP groups or whatever sets that DNS entry to whatever was obtained. PLEASE PL…

Thanks for the updates, @Mau-Wi . While you’re at it, can you convince the cnMaestro guys to let us turn off notifications for the RV22? I saw something about that coming in v5.3, but I haven’t seen a release date yet.

Hi Chris.Thanks for bringing this one up. With the new cnMaestro 5.2.1 we’ve included this improvement. It is expected to finalize the rollout in a couple of weeks. See the attached image for your reference. [image] Hope you like it.

Thanks for the quick response @Mau-Wi . I look forward to trying it once it’s released

I wanted to bubble this topic back up to the top. We are getting ready to start taking on more residential wifi issues from one of our major clients. Has firmware fixed some of these rv22 issues…if not what are you guys using for resi wifi projects…I need input for indoor 3 level homes and outdoor…G…

Any other input on the RV22 units? We are looking to deploy some for a small project that requires mesh wifi.

@Mau-Wi Do we know if bridge mode and port forwarding/dmz has been implemented? This may now be a non-starter for us to deploy for a specific use-case and have to pivot to a Deco or similar product… IE: We want to use a NSE 3000 firewall and then add the RV22 units in AP MODE ONLY - and they mes…

Cambium Community

RV22 status and roadmap questions

Products Residential Wi-Fi

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled