Scheduled Access problem?

I have configured the Scheduled Access for one of my wlans. Please note that on this wlan guest access (CnMaestro Portal) is enabled also. Ntp server is resolvable and correct time is checked on cli. After all the wlan is operated continuously even on off time. For your reference i attached the config file. Any help wil be appreciated.

hi,

did quick cross validation on my ap e410 managed from cloud cnMaestro, found no issue. i can see ssid going off after cutoff time. please see cli out put

E410-9B6348(config)#

E410-9B6348(config)# show wireless wlans

SSID                 BAND   VLAN  SECURITY          GUEST-ACCESS CLIENTS WLAN-NUM 2.4_STATE 5_STATE

My-Wi-Fi-Slow        2.4GHz 2     wpa2-psk          disabled     0       1         ON        OFF      

My-Wi-Fi-Fast        5GHz   2     wpa2-psk          disabled     2       2         OFF       ON       

Connected-Home       both   2     open              disabled     0       3         ON        ON       

xxx                  both   10    open              enabled      0       4         ON        ON       

E410-9B6348(config)#

E410-9B6348(config)#

E410-9B6348(config)#

E410-9B6348(config)#

E410-9B6348(config)#

E410-9B6348(config)#

E410-9B6348(config)# show clock

Thu 07 May 2020 14:59:35 IST

E410-9B6348(config)#

E410-9B6348(config)#

E410-9B6348(config)#

E410-9B6348(config)# show clock

Thu 07 May 2020 14:59:52 IST

E410-9B6348(config)#

E410-9B6348(config)#

E410-9B6348(config)# show clock

Thu 07 May 2020 14:59:54 IST

E410-9B6348(config)# show wireless wlans

SSID                 BAND   VLAN  SECURITY          GUEST-ACCESS CLIENTS WLAN-NUM 2.4_STATE 5_STATE

My-Wi-Fi-Slow        2.4GHz 2     wpa2-psk          disabled     0       1         ON        OFF      

My-Wi-Fi-Fast        5GHz   2     wpa2-psk          disabled     2       2         OFF       ON       

Connected-Home       both   2     open              disabled     0       3         ON        ON       

xxx                  both   10    open              enabled      0       4         OFF       OFF      

E410-9B6348(config)#

E410-9B6348(config)#

It is better to share the AP Techdump

Hi , Schedule access should work fine. If you are looking at the laptop SSID list to determine the behavior, suggest to look at the AP logs. I'm attaching the AP logs for your reference. " service show debug-logs wifid" will show you the details of WLAN SA disable/enable status.  Additionally, you can verify the schedule access behavior in the AP CLI too. Attaching another screen capture for the CLI commands run and o/p of the same. 

I've tried this in our cnPilot latest version, 3.11.4-r9 and things are working fine.  from your configuration, i;ve changed the stop time to 15:02 and verified the same. 

if you still face the issue, please share the techsupport immediately captured after the schedule stop time. 

Regards

Anand 

1 Like

Here you are. Btw why you dont support .tar files on this forum, i had to covert the exported .tar to .zip.

Hi, 

       I can see that Monitor host is configured on the WLAN. Can you try disabling the monitor host and check schedule access is  working or not? 

Regards

Anand 

1 Like

Nice, so we founded a bug. Maybe you’ll fix this on a next firmware release because we need also the feature of the monitored host.

We will fix this in the next release.

hi,

the issue has been fixed in our upcoming cnPiolt AP image 3.11.4.1-r3. if need can share image for early validation.