Hi,
When I acivate the LLDP in mode Transmit and Receive on SM and in the ePMP 1000 Sync AP nothing shows.
ePMP1000_c2f3b5>show lldp-neighbors
-------------------------------------------------------------------------------
LLDP neighbors:
-------------------------------------------------------------------------------
By the way. When Cambium will use CDP or somthing compatible with Cisco/UBNT/Mikrotik discover ?
Regards,
Ademir Peixoto .'.
Hi ademirpeixoto,
Can you please provide remote access to your ePMP devices? If no, can you please check next:
Can you tell which firmware version are you using on your ePMP devices?
And what devices are connected to your ePMP AP/SM LAN side?
Do you see received LLDP messages from ePMP on your LAN devices?
Thank you,
Artem.
Hi Artem,
They don't works on wlan side too ?
All versions are 3.0.
The operate in public and fixed ips. How can I send you the credentials ?
Regards,
Ademir Peixoto .'.
Hi ademirpeixoto,
LLDP on ePMP 1000 and ePMP 2000 devices is supported only on Ethernet/LAN side. So if LLDP is turned on, than ePMP device will advertise itself to Ethernet/LAN connected devices, and receive LLDP messages from Ethernet/LAN devices.
If you still observe issues with LLDP, you can contact me with private message on forum, or on email artem.grabenko@cambiumnetworks.com and we will negotiate remote session.
Thank you,
Artem.