Hi team, Once of our client is having almost 15 cambium Cnmatric 2052P switches installed and those all switches are connected to Core switch via fiber link,
Suddenly this afternoon, i am seeing below STP convergence of most of Switch’es uplink port.
Any help is highly appreciated.
Port 49 [Ex0/1] is Root , Forwarding
Port PathCost 2000, Port Priority 128, Port Identifier 128.49
Designated Root has priority 4096, address 68:4f:64:96:9a:04
Designated Bridge has priority 4096, address 68:4f:64:96:9a:04
Designated Port Id is 128.40, Designated PathCost 0
Received Hello Time 2 sec 0 cs
No of Transitions to forwarding State :1
Auto-Edge is enabled
PortFast is disabled, Oper-Edge is disabled
LinkType is point to Point
BPDUs : sent 83827 , received 2628701
Timers: Hello - 0, Forward Delay - 0, Topology Change - 0,
Error Disable Recovery Interval 300 sec 0 cs
Restricted Role is disabled.
Restricted TCN is disabled.
bpdu-transmit enabled
bpdu-receive enabled
Root Guard is disabled.
Loop Guard is disabled.
Dot1W mode disabled.
TC detected count : 1
TC detected Timestamp : 15 Mar 2023 07:56:31
TC received count : 63
TC received Timestamp : 22 May 2023 13:04:43
RcvInfoWhile expiry count : 33624
RcvInfoWhile expiry Timestamp : 22 May 2023 15:52:57
Impossible state occurrence count : 0
Impossible state Timestamp : -
Proposal BPDUs
---------------
Tx count : 1
Rx count : 33626
Tx Timestamp : 15 Mar 2023 07:56:31
Rx Timestamp : 22 May 2023 15:52:58
Agreement BPDUs
----------------
Tx count : 83826
Rx count : 0
Tx Timestamp : 22 May 2023 15:52:58
Rx Timestamp : -