We are seeing some great results from operators that have upgraded their software to the 24.2 Beta. There is a feature call Deeper Virtual Circuit in here that is proving to be a game changer for some folks. We’d love it if you can share your experiences using this software with as much detail as yo…

There’s going to be at least 1 more beta as there is a stuck session issue that they’re trying to track down and fix. If I had to guess as to a stable release, probably end of Feb.

Hi to all. We are starting to deploy this beta initially in 2 AP 450m 5 GHz (one in an urban zone and the other in rural zone). We are doing the preliminary documentation of the links to share the results in the next few weeks-

[Screenshot 2025-02-04 at 11-25-38 Cambium 450 Helland - Link Capacity Test root] Hi We are now testing version 24.2 on a 450m with 18 customers, and got an increase in download from 700Mbit/s to 844Mbit/s on AP, on the customer side we also see an increase from approx. 150-160Mbit/s to 190-210Mb…

@RSElektronikkAS wow, that’s the highest capacity test I’ve seen posted for a Medusa AP. Must be a low noise environment. For the Uplink stuck at 1.0, if you have turned on Interference Cancellation on the AP, that disabled MU-MIMO on the uplink and groups all clients as 1. You may want to test out …

[image] russ007: Do you have to enable this? No, you don’t have to enable this, but the AP and SM’s need to be running the 24.2 beta, and best results are seen while using 5ms frames and a 30 or 40MHz channel width while using 450b/i/v/m hardware. There are no performance gains for original P…

I test without Interference Cancellation, then the downlink capacity goes down, but the total capacity is the same. [Screenshot 2025-02-06 at 14-37-04 Cambium 450 Helland - Link Capacity Test root]

I wonder if you could be hitting the limit of what the hardware will support. Since it only have a 1Gb port, it may not be to reach much beyond 920mbps when generating traffic for the linktest. But at least you’ve confirmed what caused the Uplink grouping to be at 1.

Keep in mind that the deep vc queue optimization typically does not increase the PMP450m’s aggregate link test capacity. It only improves headline throughput on PMP450b/i/v SM’s when using 5ms frames/30/40MHz channel widths. You should focus your testing to individual SM’s.

Cambium Community

System Release 24.2 [BETA] - Share your Experience

Products PMP

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled