Можно ли где-то посмотреть текущую температуру на базах и сре еРМР-1000, Force-180, Force-190 ?
В юзер гайдах не нашёл, хотя датчик температуры должен быть:
"Upon power on, if the ePMP Force 180 device temperature is at or below 32° F (0° C), an internal heater is activated to ensure that the device is able to successfully begin operation. The unit’s heater is only activated when the unit is powered on and will not apply heat to the device once startup is complete. When the unit temperature is greater than 32° F (0° C), the heater is deactivated and the integrated module continues its startup sequence."