Hello, I'm not sure if a document like this exists. I would recommend using our LINKPlanner application for the most accurate RF information. Also, the device GUI won't allow you to violate FCC EIRP, assuming that you enter in all the information (i.e. antenna gain). In the case of PMP450m and PMP450b, they are integrated antennas, so they won't violate FCC EIRP by default. I've attached a demo LINKPlanner file that I use as a reference for looking up information like this.
There are different rules for the AP's versus SM's, and even EIRP differences within the frequency bands themselves (i.e. 5.1GHz). In general, AP and SM configuration parameters are going to be at maximum EIRP for the FCC band limit (PMP450m dynamically manages this due to the nature of the beamforming and antenna elements). LINKPlanner will show you the hardware grant restriction EIRP levels (applies to SM's), but our integrated radios will not allow you to violate FCC EIRP for the band.
Some useful links, somewhat on topic:
http://community.cambiumnetworks.com/t5/PMP-FAQ/PMP-Channel-Bandwidth-Support-Table/m-p/73902#M299
- Demo_Link.zip (30.1 KB)