Turned on EPSK on a WPA3 network. Now I need it off

Products Enterprise Wi-Fi Networks
1

Turned on WPA3 a long time ago.

Added an EPSK key and everything disconnected. Deleted that one ePSK key but still nothing works.

Appears adding a EPSK key turn on a setting I can’t find to turn off..

“This WLAN uses WPA3 security. Client registration flow is required and will be enabled when ePSK entries are added. Use the QR code to guide users for registering their clients. Note that the WLAN Passphrase will be used to verify that the client is attempting registration. Ensure that the client will get DHCP IP on the WLAN VLAN and will be able to reach cnMaestro Cloud.”

So where is “client registration flow” so I can turn it back off?

2

Hi Springs, if needed, you can remove the epsk-registration-flow with the below user defined override. Change the wireless wlan number to match your config.

!
wireless wlan 1
no epsk-registration-flow
!

3

That worked. I can connect to my wifi again.

At some point I will need to see a document showing me what that “registration flow” is supposed to be.