Unable to access Force 200 from local network

i recently change the antenna of my customer by force 200. After that i remarque is not possible to access on radios in local network. the driver mode is TDDPTP.

the driver mode is not the issue, your configuration for network access is.
you can power cycle the radio and use to gain access to the radio and make sure your network settings allow access locally and wirelessly, that your not using router or nat mode and your not using the firewalls.

If your actual problem is that it is not linking to the access point (doesnt matter whether it is in PTP mode or ptmp mode, the one radio is the AP while the other is the SM) then make sure the driver mode is correct. TDDPTP is not the same as ePTP and they will not link if one is wrong.