Hi, firstly I am very new to using the Canopy system.
I would like to ask - does anyone know if you can monitor an individual users traffic.
Or are all users usually sold a certain speed link so they can use it as much as they like but it is only operating at the specified link rate.
Any help would be appreciated.
You could assign each SM a specific IP address then monitor it with MRTG.
You can also use IPTables with a linux box as a router to control tranmission speeds.
BAM will also allow you to set specific speeds (sustained or bursting) at each SM.
Allot also sells a product called the NetEnforcer that will let you set what the max transmission or max total transfer amount per the IP of each SM.
Matt
P.S. if you want to do something else besides what I mentioned you might want to clarify your question.