I wonder if anyone can help me on which items from the AP and SM function can be enabled for the trafficking of IP camera, IP camera because I have a Bosch VG4 AUTODOME where to use it for a Canopy link to a loss of quality of image, already noticed that the band is no problem because the Canopy Advantage and link are for now only have 1 AP with 1 MS, the manufacturer tells me that the Bosch Canopy traffic is not good for the image of the product it is better that another radio . Tried to listen to various experts in this camera that I say the same thing, I do not believe in that possibility, so please help in this forum that either one can say which items Canopy radio’s configuration can be enabled for the improvement of traffic image of camera …
Thanks for the space …
what freq. antenna are you using? what downlink %? whats the link test look like? how do you have QoS configured?
nucoles wrote: what freq. antenna are you using? what downlink %? whats the link test look like? how do you have QoS configured?
A freq 5700, CANOPY PMP200 , o downlink 50% , the link is tested on the bench, is configured QSO 5 Mbps Dow and UP, the link only has the IP camera, I wonder if you are the configuration items that help the video traffic.
the bench test link test wont tell you anything. you need an actual link test and %'s with it on the tower. could be 100% at bench test and only 50% when installed depending on alignment and interference. need these values to help any further.
What is the video quality?
AMDXtreme wrote: What is the video quality?
The video image of the camera when the drive is a drag on the image to blur in motion, but this only happens when I use it for the link, the cable is right perfect if the image is something that is missing link in these frame ...