VLAN management on Data service (PTP series)

Possibility of managing which VLANs to allow for the Data service.

This would be helpful for isolating the Management and Data services.

I'm in a situation where I have to use the AUX port alongside the PSU port on our PTP 650's to isolate the management and data services.

Basically I want to achieve this:

VLAN 1 for management, VLAN 2 for data.

Trunked both VLANs on the switch port, hooked up to the PSU port on the PTP 650.

Only allow VLAN 2 over the wireless link, so I can't reach VLAN 1 on the other side.