we have just upgraded 1 AP and some SMs to v6.1.we are about to deploy
Vlan for our customers .but we have following Queries.
we want to keep 2 SM connected to an AP in seperate VLAN from other SM connected to the same AP.lets name these SM as SM1 and SM2 (which will not be in default vlan ,they will be in VLAN2).as far as we know,by default all the SM that have upgraded to v6.1 will be in Vlan1.
following is the Vlan related configuration in AP
VLAN CONFIGURATION
vlan :enable
dynamic learning :enable
allow only tagged frame :disable
vlan aging timeout :25(default value)
untagged ingress vid :1(default value)
management vid :1(default value)
VLAN MEMBERSHIP
VLANID TYPE
1 Permanent
2 Static
following is the vlan related configuration in SM
VLAN CONFIGURATION
dynamic learning :enable
allow only tagged frame :disable
vlan aging timeout :25(default value)
untagged ingress vid :1(default value)
management vid :1(default value)
VLAN MEMBERSHIP
VLANID TYPE
1 Permanent
2 Static
we have following queries
Can we make SM1 and SM2 as member of vlan2.is it by management vid?we are able to establish sessions with AP even though the management vid
of SM1 and SM2 are different.
we guess that we can make Hosts PCs in same VLAN(VLAN2) that are
connected to SM1 and SM2 through managable switch(switch having
features of vlan)
can anybody help us?
Best Regards
MOS