Webinar: Back To Basics with ePMP How WISPs Can Build Networks That Scale

Webinar For APAC Timezones

Back To Basics with ePMP - How WISPs Can Build Networks That Scale

Tuesday, February 3 | 3:00 AM UTC | 8:30 AM IST | 2:00 PM AEDT | 4:00 PM NZST

Tuesday Feb 10 | 10:00 AM CST | 11:00 AM EST | 4:00 PM UTC

Webinar Overview

WISPs everywhere are facing the same reality: rising noise floors, limited spectrum, increasing competition from fiber, 5G, and LEO, and ARPU that isn’t going up. In this environment, success is about building networks that scale predictably, remain profitable, and protect capital over time, not chasing peak speeds or frequent technology refreshes.

This webinar focuses specifically on how ePMP helps WISPs get Back to Basics by reinforcing the fundamentals that matter most in real-world deployments: interference, mixed subscriber density, truck roll costs, and upgrade pressure, with the design choices that are built into the ePMP platform.

ePMP does not force disruptive upgrades or expensive redesigns, rather it enables WISPs to start small, grow dense, and evolve at their own pace. From predictable airtime behavior under load, to interference tolerance by design, to economics aligned with flat ARPU, this webinar will demonstrate how ePMP supports long-term production networks, not just short-term wins.

Presenters:

  • Bruce Collins - Sr. Director - Product Line Management
  • Fedor Trutsko - QA Manager

Learn More and register here

APAC Timezones: https://go.cambiumnetworks.com/l/428442/2026-01-22/5ck631

NA Timezones: https://go.cambiumnetworks.com/l/428442/2026-01-22/5ck6b4

2 Likes

Thank you for doing this. The WISP industry has a lot of assumed knowledge as well as myths, misconceptions, and misunderstandings. It is always a good idea to go back to the basics, especially since the basics starts with high quality antennas. :wink:

Here are how those two session times look around the globe:

Asia-Pacific Tuesday, February 3 | 3:00 AM UTC | 8:30 AM IST | 2:00 PM AEDT | 4:00 PM NZST

**
**

North America Tuesday Feb 10 | 10:00 AM CST | 11:00 AM EST | 4:00 PM UTC