WPA3 config with User-Defined Overrides in cnMaestro

Products cnMaestro
1

As the WP3 configuration is under development in the cnMaestro configuration, it is possible to configure WPA3 with the new Wi-Fi6 AP´s through a User-Defined Overrides script. You configure your “WLANs” as normal with WPA2 and push a script to the User-Defined Overrides section into the matching AP-Group.
See following example script and attached screenshot for WPA3-PSK:

!
wireless wlan 1
security wpa3-sae
passphrase hallo12345678test
!

User-Defined-Overrides-WPA3
User-Defined-Overrides-WPA31920×912 92.1 KB

1 Like
2

Please note that the number value that should be used for “wireless wlan 1” is based on the WLAN ordering specified in the Basic section of the AP Group (first page).

image

1 Like
3

Thanks Jordan, for pointing this out. Important for folks that are not using cnPilot / cnMaestro on a daily basis.

1 Like