Hi team, Installing XV2-2T at customer sites to provide Wifi around their sheds (500m or more) and need advise on how to get the maximum out of them( As percambium it can serve more than 1000m). Installed, configured, but didnt work beyond 200m then we replaced with e510 and it gives the same range…

[Ridgewood XV2-2T] [Ridgewood XV2-2T_CoverageRequired] Main area is the cottage with red roof. XV2-2T ounted on the roof of the other house(height approx 4m). have some trees, but the distance is below 200m and have a LOS from cottage to house AP. but only getting -80 or lower.

You are going to need a PtP link, and then an access point on the other side.

So, this XV2-2T doesn’t work even 200m? we replaced with e510 and same signal level (-80). it looks like e510 PCB in a big housing :sunglasses: and customer pays more for the big housing.

I would like to take a look at your config. Please email me a tech-support dump with wireless client(s) connected. Please email tech-support log to gary.hansen@cambiumnetworks.com .

The transmitter in the client device is not gonna make it back to the access point. Now you can shake your fist and scream at the sky… Or you can do what I said, and solve the problem.

The AP swapped with e510 since it didn’t fulfill customer requirement.

[image] GaryHans: gary.hansen@cambiumnetworks.com emailed the file. thanks

Now for clarity… The E510 does or does NOT work in the same spot?

same spot, same distance as XV2-2T. same RSSI level (-78 to -80).

Let me try that again… Does the e510 allow clients to connect and use the internet, in the same spot?

XV2-2T configuration

Products Enterprise Wi-Fi Networks

madmax123 (madmax123) October 13, 2022, 3:45am 20

Same problem