Release 6.6.2 is a maintenance release of Release 6.6 with new features, enhancements, and bug fixes.
Firmware
New features, enhancements
Auto-RF Iterations
Auto-RF iterations limits the number of Auto-RF triggers that the AP initiates based on configured frequency. Users can configure the iterations to restrict Auto-RF changes to those many times. Auto-RF follows the user-defined limit, based on scheduled intervals or hold time, without altering its default operation. By default, the value is 0, that is, the Auto-RF function will not stop and continues to run at the configured interval. The iteration count resets when the AP restarts or when the radio resets. When the AP exceeds the configured iteration count, the Dynamic Channel Selection (DCS) method of channel selection takes over.
Fallback to WLAN VLAN when RADIUS-based MAC Authentication fails
The failed-allow-traffic option in the WLAN profile allows APs to assign the default WLAN VLAN to clients failing RADIUS-based MAC authentication. To assign the default WLAN VLAN to such clients, include the mac-authentication radius failed-allow-traffic command in the AP Groups > User Overrides section in cnMaestro.
If clients pass MAC authentication, the RADIUS server assigns the configured VLAN.
This feature is only available for RADIUS-based MAC authentication. The use case for this feature is to provide limited access to clients not included in the approved RADIUS MAC list, such as granting access to a walled garden, the internet, or redirecting the clients to go through the captive portal authentication.
Fixed issues
| Tracking ID | Platform | Description |
|---|---|---|
| FLCN-16917 | All | RADIUS assigned VLAN from the MAC authentication was being overwritten by WLAN VLAN. |
| FLCN-16758 | All | Auto cell was triggered on all radios even when some radios were assigned with static power. |
| FLCN-13769 | All | DPI statistics update to cnMaestro was failing due to random application process restart. |
For more details regarding new features, enhancements, bug-fixes, and known issues, please refer Documentation / Cambium Networks Support