ePMP 1000 Mode recovery

HI, i have a epmp1000 integrated radio. 

The device turns on but does not give me ping response. I press the reset button but not reset. Is there any way to access the revoery mode, or how I can fix this. Try shutting down and starting cycle for several seconds but the device does not respond.

I tried: 

https://www.youtube.com/watch?v=8FICCL8fXqc

http://community.cambiumnetworks.com/t5/PTP-650/Reset-to-factory-default-PTP650-or-rcovery-mode/td-p/34025

http://community.cambiumnetworks.com/t5/Spanish/Alguien-podria-indicarme-como-hago-reset-epmp1000-desde-poe/td-p/41570

My native language is Spanish, sorry if this mistranslated.

Por favor, por defecto la radio a través del ciclo de potencia. He adjuntado el procedimiento por defecto del dispositivo a la configuración de fábrica.IP del ordenador portátil y el dispositivo debe estar en el mismo rango.Por favor, cambie el cable también

Hola Jhaldave,

Pienso que usted ha hecho el siguiente solución de problemas.

¿Ha puesto su computadora portátil en la misma red, que está en la EPMP?

La radio está en el laboratorio o en la torre?

Si ya hizo estos la solución de problemas, por favor envía sus datos a support@cambiumnetworks.com.

Saludos,

Akshay  Rana.

i tried this solution, and the device still does not respond. The ping to 192.168.0.1 and 192.168.0.2 not respond. My pc have the ip 192.168.0.100/24.


@jhaldave wrote:

i tried this solution, and the device still does not respond. The ping to 192.168.0.1 and 192.168.0.2 not respond. My pc have the ip 192.168.0.100/24.


Hi, 

Can you please try accessing the raido using 169.254.1.1? Configure you PC IP address to 169.254.1.100 as an example.

Thanks,

Sriram

Tengo el mismo problema.. como lo lo soluciono?