ePMP 300-13 L failed booting

[aka (Andrii)]

Hi @Baginda_Sakti_Haholo,

it sounds like something went wrong during flashing and your radio is in a recovery mode.
Please, try this recovery procedure:

Recovery of flash corrupted 802.11n-based ePMP devices caused due to power interruption during a software upgrade

This topic describes the recovery procedure for ePMP1000/F180/F200/F190 devices. For ePMP3000, ePMP3000L, ePMP 3000MP and F300 devices, please see this newer article. Problem Statement: All ePMP radios, except the Connectorized Radios with Sync, have a single flash bank. There is a high probability that the flash bank can get corrupted when power to the radio is interrupted during a flash write, i.e. software upgrade. This is not an issue with the Sync radio since there are two flash banks i…