Impssible d'acceder a mon antenne cambium force 130

[BARRY_OUMAR]

Salut

j’ai perdu la mains de mon antenne cambium force 130 lors d’une mis à jour que j’ai entamer mais suite à une variation du courant je n’arrive plus a l’accéder alors que les voyant sont tous allumé ?

avez-vous une solution svp.

Merci à l’avance pour votre assistance

I lost control of my Force 130 cambium antenna during an update I started, but due to a power surge, I can no longer access it even though all the indicator lights are on.

Do you have a solution, please?

Thank you in advance for your assistance.

Barry Alpha Oumar

Afribone-Guinée

[aka (Andrii)]

Hello @BARRY_OUMAR,

It appears that the SW image was not flashed successfully due to a power interruption. Please proceed with the recovery by following the guide below

Please don’t hesitate to reach out if you need any assistance.

Recovery of flash corrupted 802.11n-based ePMP devices caused due to power interruption during a software upgrade

This topic describes the recovery procedure for ePMP1000/F180/F200/F190 devices. For ePMP3000, ePMP3000L, ePMP 3000MP and F300 devices, please see this newer article. Problem Statement: All ePMP radios, except the Connectorized Radios with Sync, have a single flash bank. There is a high probability that the flash bank can get corrupted when power to the radio is interrupted during a flash write, i.e. software upgrade. This is not an issue with the Sync radio since there are two flash banks i…

[BARRY_OUMAR]

Oui Bonjour Andrii

Merci pour ton assistance sauf que mon antenne cambium est de F130 !

je vai qu’à meme verifier est je te reviendrais aucours de la journée.

Merci encore