Installing the CMM5: Installing a Controller/Injector Side by Side

Products CMM5
1

Perform the following procedure to install a Controller/Injector combination.

 

Step

Action

1

Ensure that the following hardware is available:

  • (2) standard mounting ears for a 19-inch rack
  • (2) spacers
  • (4) mounting screws for each mounting ear
  • (1) joining bar (w/attaching hardware)
  • (1) joining screw (mounted in rear)

2

Use 4 mounting screws to secure a mounting ear to the injector.

3

Use 2 mounting screws to secure the other end of the mounting ear to the rack.

4

Attach the joining bar (with hardware) as shown.

5

Install the rear joining screw as shown.

Installing a Controller_Injector Side by Side.png
Installing a Controller_Injector Side by Side.png856×388 361 KB

1 Like
2

Hi,

Are these mounting ears and joining bars coming with the unit?

Thanks,
Sampath