CMM5: Getting Started
Follow these Knowledge Base articles to install and configure CMM5 for Synchronization.
Introduction to Synchronization
- Interference and reliability
GPS synchronization - Configuration options for TDD synchronization
- Alternative to GPS synchronization
Safety and Regulatory Information
Product Overview
Initial Startup and Cabling
Configuration
- CMM5 Injector Configuration
- CMM5 Controller Configuration: Log In and Password
- CMM5 Controller Configuration: View and Configure Network
- CMM5 Configuring System Properties and Time Synchronization
- CMM5 Configure SNMP
- CMM5 Configuring Injectors
- CMM5 Backup and Restore Configuration
CMM5 Injector Operations
- CMM5 Injector Operation: Blink the CMM5 Injector LEDs
- CMM5 Injector Operation: Read the CMM5 Injector Status
- CMM5 Injector Operation: Read and Modify the CMM5 Injector Parameters
- Displaying the CMM5 Injector Serial Number
CMM5 Controller Operation
- CMM5 Controller Operation: View Controller Status
- CMM5 Controller System Operations
- CMM5 Controller Services
- CMM5 Controller Network Operation
- CMM5 Logout and Shutdown Operations
- CMM5 Error Conditions
CMM5 Firmware Update
CMM5 Installation
- Installing the CMM5: Preparation
- Installing the CMM5: Grounding Equipment
- Installing the CMM5: Installing a Single Controller
- Installing the CMM5: Installing a Single Injector
- Installing the CMM5: Installing Two Injectors Side by Side
- Installing the CMM5: Installing a Controller/Injector Side by Side
- Installing the CMM5: Installing a 600 Watt Power Supply
- Installing the CMM5: Installing a Split DC Power Line
- Installing the CMM5: Cabling the CMM5
- Installing the CMM5: Replaceable Fuses
- CMM5 Class A Emissions Requirement
cnPulse (GPS sync generator) Module
- cnPulse Introduction
- cnPulse: Ports Definition
- cnPulse: Synchronizing two radios with one cnPulse
- cnPulse to CMM5 Cable Pinout
- cnPulse: CMM5 Deployment
- cnPulse: CambiumSYNC Mode Deployment
- cnPulse: AUX Port Mode Deployment