Installing the CMM5: Installing a Split DC Power Line

[JBoeldt]

A split DC power line is used in situations where you have one injector and one controller.

 

Step	Action
1	Ensure that the following hardware is available: (1) 240 Watt Power Supply (1) DC Line Filter (1) Junction Box (1) Connector (Injector) (1) Connector (Controller) (2) Wire Nuts (1) AC Lline Adapter
2	Connect the Red and Black leads of the 240 Watt Power Supply to the Line side of the DC Line Filter.
3	Connect the Red and Black leads of the Load side of the DC Line Filter to junction box.
4	Connect the Injector and Controller leads to the other side of the junction box.