Perform the following procedure to install two Injectors side by side in a 19” rack.
|
Step |
Action |
|
1 |
Ensure that the following hardware is available:
|
|
2 |
Use 4 mounting screws to secure a mounting ear to the left side of the injector. |
|
3 |
Use 4 mounting screws to secure a mounting ear to the right side of the injector. |
|
4 |
Attach the joining bar (with hardware) to the Injectors as shown. |
|
5 |
Use 2 mounting screws to secure the other end of the mounting ear to the rack. |
|
6 |
Install the rear joining screw as shown. |
