MAC Bind List in cnPilot E400

CAM_TSK · October 9, 2018, 6:03am

Hello nbctcp,

Requirement stated below can be achecived by using cnMaestro MAC Authentication and DHCP server defined on AP.

Please configure the device as follows:

Configure a VLAN interface and respective DHCP pool and bind client MAC and IP respectively.
- Please use this URL for configuration
  - http://community.cambiumnetworks.com/t5/cnPilot-E-Series-Enterprise-APs/How-to-configure-DHCP-Pool-to-give-IP-address-to-the-connected/m-p/61775
Create a WLAN profile with above VLAN configured.
Enable cnMaestro MAC authentication
- Navigate to Configure -> WLAN -> Access -> MAC Authentication -> MAC Authentication Policy
- On cnMaestro, navigate to Configuration -> Association ACL
  - Add default rule to DENY
  - Add all client MAC address to ALLOW which you wish to connect.

Please let me know if you have any query.

Thank You.